Balmoral 3 Seat Bench. Natural
The Balmoral Garden Bench features a traditional design for a three seater garden bench. It is an ideal product to site in a relaxing area of the garden but can also be useful as an addition to a dining table. The product is made from FSC certified timber from well managed forests and is supplied treated against fungal decay and wood rotAvailable Now with Free Delivery to any UK Mainland Address
The Balmoral 3 Seat Garden Bench - Natural
- Pressure treated for protection against wood rot and decay.
- Made from FSC timber from well managed Northern European forests.
- Seats 3 people.
- Supplied with drill holes and quality fixings.
- Flatpacked with easy to use instructions.
- Traditional design that is ideally sited in a relaxing area in the garden
MaintenanceWood will fade to a pleasing silver tone in natural light. It is perfectly acceptable to leave it like this. You can stain your bench any colour using a water based wood furniture stain. (Follow manufacturers instructions). It is not uncommon, in worked timber, for small splits or shakes to occur, or slight warping in quick drying weather conditions. These will normally go back when humidity rises. This is nature at work and is perfectly normal. It does not affect the strength and durability of your furniture. Wood is a living, breathing material. In dry weather conditions, cracks and tears may appear in the planks which vanish when weather conditions become damper. Certain perceived “flaws” are perfectly normal in wood.
Knots in the wood
Knots, which have fallen out (max cross size 2 cm), on the wood surface which does not damage products general structural strength
Knots, which have fallen out, at the sawing edge of the planks provided that the resulting holes are closed by assembly
Discolouration or fading (does not detract from the wood's life span)
Straight tears and cracks, provided these are not wide-open cracks which cut through the plank
Do not worry if cracks appear at a dry climate. Wood is a living material, which seasons with changes in temperature and humidity. The cracks disappear should the humidity rise again
Cracks and tears because of shrinkage or desiccation, which do not jeopardise the solidity of the construction
The appearance of resin
Torsion and warping provided this does not affect products general structural strength
In dry weather conditions, it is possible for knots to fall out. Any holes thus formed are to be filled using wood filler
|97cm height x 170cm width x 63cm depth